FIR Filter Block:
This block represents the FIR Filter within the corresponding output
channel. The graph shows the frequency response that results from
the set FIR parameters. The LED indicate if the FIR Filter is being
used. A single click with the left mouse button onto this block opens
the FIR page.
Clicking with the right mouse button opens the Copy & Paste menu,
which allows copying all parameters of the corresponding FIR Filter
block to any other FIR Filter block within the same project.
Level Block:
The numerical field is identical to the numerical field below the level
controls in the Amplifier Control Panel. So the field indicates the
actually set attenuation, by which the internally specified amplification
is attenuated, in dB.
The MUTE button is for attenuating the output level of the
corresponding amplifier output to -∞. Clicking the MUTE button with
the left mouse button mutes the corresponding amplifier output. The
MUTE button is virtually pressed and lights red. Clicking the MUTE
button once again with the left mouse button disables the mute-
function and the amplifier output is again active. The MUTE button is
virtually disengaged and not lit.
Limiters Block:
This block provides graphical display of the limiters functions of the
corresponding output. The two LEDs indicate whether peak limiter or
thermal limiter have been activated. The graph provides indication of
the set values.
Clicking with the right mouse button opens the Copy & Paste menu,
which allows copying all parameters of the corresponding Limiters
block to any other Limiters block within the same project.
Output Block:
The text field allows specifying a name for the corresponding output
channel.
A click with the right mouse button onto OUT A or OUT B opens the
Copy & Paste menu, which allows copying all parameters of the
corresponding output channel (Routing, Channel EQ, X-Over, FIR
Filter, Dynamics) to any other output channel within the same project.
However, it is important to bear in mind that the DSP data only is
being copied. Impedance or speaker data is not copied.
Allows import and export of Speaker Settings. A Speaker Settings file
contains the loudspeaker specific settings for DSP blocks Channel EQ,
Crossover, FIR Filter and Dynamics & Protect. The text field allows
editing the description of the Speaker Setting file.
IRIS-Net
IRIS-Net | en
95
Bosch Security Systems B.V.
User Manual
2017.05 | 3.20 | F.01U.119.956
