ABB RELION 650 SERIES, Technical Manual

Page: 795 / 942

Name of signal Description Displayed on
local HMI as
Reasons for activation
IEC61850ERROR IEC
61850
Error
status
IEC61850 This signal will be active if the IEC 61850 stack
did not succeed in some actions like reading
IEC 61850 configuration, startup, for example
DNP3 DNP3
error
status
DNP3 This signal will be active when DNP3 detects
any configuration error during startup.
LMDERROR LON/Mip
Device
Error
status
SLM301 LON network interface, MIP/DPS, is in an
unrecoverable error state.
APPERROR Runtime
Applicatio
n Error
status
Runtime
App Error
This signal will be active if one or more of the
application threads are not in the state that
Runtime Engine expects. The states can be
CREATED, INITIALIZED, RUNNING, for
example
SETCHGD Settings
changed
Settings
changed
This signal will generate an Internal Event to the
Internal Event list if any settings are changed.
SETGRPCHGD Setting
groups
changed
Settings
changed
This signal will generate an Internal Event to the
Internal Event list if any setting groups are
changed.
Table 587: Self-supervision's hardware dependent internal signals
Card Name of signal Description Displayed on
local HMI as
Reasons for activation
PSM PSM-Error Power
Supply
Module
Error
status
PSM1 Activated if the module has a hardware
error.
BIM BIM-Error Binary In
Module
Error
status
BIMn Activated if the module has a hardware
error.
n = slot number
BOM BOM-Error Binary
Out
Module
Error
status
BOMn Activated if the module has a hardware
error.
n = slot number
IOM IOM-Error In/Out
Module
Error
status
IOMn Activated if the module has a hardware
error.
n = slot number
SOM SOM-Error Static Out
Module
Error
status
SOMn Activated if the module has a hardware
error.
n = slot number
NUM NUM-Error Numerical
/CPU
Module
Error
status
NUM30 Activated if the module has a hardware
or software error.
Table continues on next page
1MRK 506 382-UEN A
Section 18
Security
Line distance protection REL650 2.2 IEC 789
Technical manual