ABB RELION 650 SERIES, Technical Manual

Page: 713 / 942

• when SyncLostMode = Block , and the time quality of the
hardware is within the set value [ SyncAccLevel=1us, 4us or
Unspecified ]
• when SyncLostMode = BlockOnLostUTC , the time quality of the
hardware is within the set value [ SyncAccLevel=1us , 4us or
Unspecified ] [AND] IED receives global common time[UTC]
from any of the FineSyncSource like IRIG-B, PTP or GPS.
• when SyncLostMode = NoBlock
• ERROR[1] indicates
•
when SyncLostMode = Block , and the time quality of the
hardware is not within the set value [ SyncAccLevel=1us , 4us or
Unspecified ]
• when SyncLostMode = BlockonLostUTC , the time quality of the
hardware is not within the set value [ SyncAccLevel=1us , 4us or
Unspecified ] [OR] IED doesn't receive global common
time[UTC] from any of the FineSyncSource like IRIG-B, PTP or
GPS.
• SMPLLOST:
•
NO[0] indicates that the merging unit samples are received from the
merging unit and are accepted
• YES[1] indicates
• when merging unit data are generated by internal substitution
• when one/more channel's Quality is not good
• when merging unit is in Testmode/detailed quality=Test , IED is
not in test mode
• MUSYNCH:
•
OK[0] indicates
• when SyncLostMode = Block/BlockOnLostUTC , the time quality
of the hardware is within the set value [ SyncAccLevel=1us , 4us or
Unspecified ] [AND] merging unit is time synchronized
[ smpSynch flag in datastream is not equal to 0]
• when SyncLostMode = NoBlock , the merging unit samples are
received
• ERROR[1] indicates
• when SyncLostMode = Block/BlockOnLostUTC , the time quality
of the hardware is not within the set value [ SyncAccLevel=1us ,
4us or Unspecified ] [OR] merging unit is not time synchronized
[ smpSynch flag in datastream is equal to 0]
• when SyncLostMode = NoBlock , the merging unit samples are not
received
• TESTMODE:
•
NO[0] indicates that No merging unit analog channels are in testmode
• YES[1] indicates that one/more subscribed channels are in testmode
• SIMMODE:
1MRK 506 382-UEN A
Section 17
Station communication
Line distance protection REL650 2.2 IEC 707
Technical manual