ABB RELION 650 SERIES, Technical Manual

Page: 627 / 942

supervised with four settable limits: low-low limit, low limit, high limit and high-
high limit. The measure value expander block (RANGE_XP) has been introduced
to enable translating the integer output signal from the measuring functions to 5
binary signals: below low-low limit, below low limit, normal, above high limit or
above high-high limit. The output signals can be used as conditions in the
configurable logic or for alarming purpose.
14.8.3 Function block
SEMOD54336-4 v3
IEC05000346-2-en.vsd
RANGE_XP
RANGE* HIGHHIGH
HIGH
NORMAL
LOW
LOWLOW
IEC05000346 V2 EN-US
Figure 315: RANGE_XP function block
14.8.4 Signals
SEMOD53803-1 v2
PID-3819-INPUTSIGNALS v5
Table 434: RANGE_XP Input signals
Name Type Default Description
RANGE INTEGER 0 Measured value range
PID-3819-OUTPUTSIGNALS v5
Table 435: RANGE_XP Output signals
Name Type Description
HIGHHIGH BOOLEAN Measured value is above high-high limit
HIGH BOOLEAN Measured value is between high and high-high
limit
NORMAL BOOLEAN Measured value is between high and low limit
LOW BOOLEAN Measured value is between low and low-low limit
LOWLOW BOOLEAN Measured value is below low-low limit
14.8.5 Operation principle
SEMOD52462-4 v5
The input signal must be connected to a range output of a measuring function block
(CVMMXN, CMMXU, VMMXU, VNMMXU, CMSQI, VMSQ or MVGAPC).
The function block converts the input integer value to five binary output signals
according to
table 436 .
1MRK 506 382-UEN A
Section 14
Monitoring
Line distance protection REL650 2.2 IEC 621
Technical manual