Rohde & Schwarz FSW13, Руководство пользователя

Страница: 155 / 1150

Measurements
R&S
®
FSW
155 User Manual 1173.9411.02 ─ 19
●
"Detector" on page 144
●
"Trace Averaging" on page 145
Note: The reference level is not affected by this function. To adjust the reference level
automatically, use the Setting the Reference Level Automatically (Auto Level) function
in the AUTO SET menu.
Remote command:
[SENSe:
​
]POWer:
​
ACHannel:
​
PRESet
​
on page 699
Sweep Time
With the RMS detector, a longer sweep time increases the stability of the measure-
ment results. For recommendations on setting this parameter, see
"Sweep Time"
on page 142.
The sweep time can be set via the softkey in the "Ch Power" menu and is identical to
the general setting in the "Sweep" configuration dialog box.
Remote command:
[SENSe:
​
]SWEep:
​
TIME
​
on page 842
5.3.4.2 Channel Setup
The "Channel Settings" tab in the "ACLR Setup" dialog box provides all the channel
settings to configure the channel power or ACLR measurement. You can define the
channel settings for all channels, independent of the defined number of
used Tx or
adjacent channels (see "Number of Channels (Tx, ADJ)" on page 152).
For details on setting up channels, see chapter 5.3.6.2, "How to Set up the Channels" ,
on page 173.
In addition to the specific channel settings, the general settings "Standard"
on page 150 and "Number of Channels (Tx, ADJ)" on page 152 are also available in
this tab.
The following settings are available in individual subtabs of the "Channel Settings" tab.
Channel Bandwidths ................................................................................................... 156
Channel Spacings ....................................................................................................... 156
Limit Checking .............................................................................................................157
Weighting Filters ......................................................................................................... 158
Channel Names .......................................................................................................... 158
Channel Power and Adjacent-Channel Power (ACLR) Measurement