Rohde & Schwarz FSW13, Руководство пользователя

Страница: 757 / 1150

Remote Commands
R&S
®
FSW
757 User Manual 1173.9411.02 ─ 19
Example:
//Select the band category 1
ESP2:MSR:BCAT BC1
//Set the base station class to medium range
ESP2:MSR:CLAS MED
//Set the maximum output power to 10 dBm.
ESP2:MSR:MPOW 10
//Set the frequency range of the base station to > 3 GHz
ESP2:MSR:BAND:HIGH
//Set the base station RF bandwidth to 20 MHz
ESP2:MSR:RFBW 20MHZ
//Calculate limits for MSR SEM
ESP2:MSR:APPL
Manual operation: See "Base Station Class" on page 220
[SENSe:]ESPectrum<sb>:MSR:GSM:CARR <Power>
Defines the power of the GSM carrier (if available, see
[SENSe:
​
]ESPectrum<sb>:
​
MSR:
​
GSM:
​
CARR
​
on page 757).
This command is only available for band category 2 (see
[SENSe:
​
]ESPectrum<sb>:
​
MSR:
​
BCATegory
​
on page 755).
Suffix:
<sb>
.
1 | 2 | 3
Sub block in a Multi-SEM measurement
Parameters:
<Power> numeric value
Range:
0 dBm to 100 dBm
*RST: 39.0 dBm
Example:
//Select the band category 2
ESP2:MSR:BCAT BC2
//Set the base station class to medium range
ESP2:MSR:CLAS MED
//Set the maximum output power to 10 dBm.
ESP2:MSR:MPOW 10
//Set the base station RF bandwidth to 20 MHz
ESP2:MSR:RFBW 20MHZ
//GSM/Edge present
ESP2:MSR:GSM:CPR
//Power of the GSM carrier is 20dBm
ESP2:MSR:GSM:CARR 20
//Calculate limits for MSR SEM
ESP2:MSR:APPL
Manual operation: See "Power GSM Carrier" on page 221
Configuring and Performing Measurements