Rohde & Schwarz FSW13, Руководство пользователя

Страница: 648 / 1150

Network and Remote Operation
R&S
®
FSW
648 User Manual 1173.9411.02 ─ 19
Starting IECWIN
IECWIN is available from the Windows task bar on the R&S FSW, or by executing the
following file:
C:\Program Files (x86)\Rohde-Schwarz\FSW\<1.10 or higher>\
iecwin32.exe
You can also copy the program to any Windows PC or laptop. Simply copy the
iecwin32.exe
,
iecwin.chm
and
rsib32.dll
files from the location above to the
same folder on the target computer.
When the tool is started, a "Connection settings" dialog box is displayed. Define the
connection from the computer the IECWIN tool is installed on to the R&S
FSW you
want to control. If you are using the tool directly on the R&S FSW, you can use an NT
Pipe (COM Parser) connection, which requires no further configuration. For help on
setting up other connection types, check the tool's online help (by clicking the "Help"
button in the dialog box).
The IECWIN offers an online help with extensive information on how to work with the
tool.
10.4 Network and Remote Control Settings
The network and remote control settings are defined in the "N Remote" dialog
box which is displayed when you press the SETUP key and then select "N
Remote".
Network settings in secure user mode
Be sure to store all network settings before Secure User Mode is enabled; see chap-
ter 3.1.7, "Protecting Data Using the Secure User Mode" , on page 37.
If the currently stored network settings are not suitable, you must correct them each
time you switch on the R&S
FSW in secure user mode, as the settings are not stored
permanently in this case.
The remote commands required to define these settings are described in chap-
ter 11.10.5, "Configuring the Network and Remote Control" , on page 1035.
Step-by-step instructions are provided in chapter 10.5, "How to Set Up a Network and
Remote Control" , on page 657.
● General Network Settings ..................................................................................... 649
● GPIB Settings ........................................................................................................650
● Compatibility Settings ............................................................................................652
● LXI Settings ...........................................................................................................655
Network and Remote Control Settings