Rohde & Schwarz FSW13, Руководство пользователя

Страница: 511 / 1150

Common Analysis and Display Functions
R&S
®
FSW
511 User Manual 1173.9411.02 ─ 19
To display the "Phase Noise Config" dialog box, do one of the following:
●
Press the MKR FUNC key, then select the "Select Marker Function" softkey. Then
select the "Phase Noise" button. Select the "Phase Noise Config" softkey.
●
In the "Overview", select "Analysis", and switch to the vertical "Marker Function
Config" tab. Then select the "Phase Noise" button. Select the "Phase Noise Con-
fig" softkey.
For more information see chapter 7.4.1.8, "Measuring Phase Noise" , on page 490.
Phase Noise Measurement State ............................................................................... 511
Defining a Reference Point ......................................................................................... 511
Switching All Phase Noise Measurements Off ............................................................512
Phase Noise Measurement State
Activates or deactivates phase noise measurement for the reference point in the dia-
gram.
This function is only available for delta markers.
If activated, the delta markers display the phase noise measured at defined offsets
from the reference position.
Remote command:
CALCulate<n>:
​
DELTamarker<m>:
​
FUNCtion:
​
PNOise[:
​
STATe]
​
on page 957
CALCulate<n>:
​
DELTamarker<m>:
​
FUNCtion:
​
PNOise:
​
RESult?
​
on page 957
Defining a Reference Point
Instead of using marker 1 as the reference marker, a fixed reference marker can be
defined for phase noise measurement.
Marker Usage