Remote Commands
R&S
®
FSW
697
User Manual 1173.9411.02 ─ 19
Query parameters:
<Measurement>
ACPower | MCACpower
ACLR measurements (also known as adjacent channel power or
multicarrier adjacent channel measurements).
Returns the power for every active transmission and adjacent
channel. The order is:
•
power of the transmission channels
•
power of adjacent channel (lower,upper)
•
power of alternate channels (lower,upper)
MSR ACLR results:
For MSR ACLR measurements, the order of the returned results
is slightly different:
•
power of the transmission channels
•
total power of the transmission channels for each sub block
•
power of adjacent channels (lower, upper)
•
power of alternate channels (lower, upper)
•
power of gap channels (lower1, upper1, lower2, upper2)
The unit of the return values depends on the scaling of the y-
axis:
•
logarithmic scaling returns the power in the current unit
•
linear scaling returns the power in W
CN
Carrier-to-noise measurements.
Returns the C/N ratio in dB.
CN0
Carrier-to-noise measurements.
Returns the C/N ratio referenced to a 1
Hz bandwidth in
dBm/Hz.
CPOWer
Channel power measurements.
Returns the channel power. The unit of the return values
depends on the scaling of the y-axis:
•
logarithmic scaling returns the power in the current unit
•
linear scaling returns the power in W
For SEM measurements, the return value is the channel power
of the reference range (in the specified sub block).
PPOWer
Peak power measurements.
Returns the peak power. The unit of the return values depends
on the scaling of the y-axis:
•
logarithmic scaling returns the power in the current unit
•
linear scaling returns the power in W
For SEM measurements, the return value is the peak power of
the reference range (in the specified sub block).
OBANdwidth | OBWidth
Occupied bandwidth.
Returns the occupied bandwidth in Hz.
Usage:
Query only
Configuring and Performing Measurements
