Rohde & Schwarz FSW13, Руководство пользователя

Страница: 929 / 1150

Remote Commands
R&S
®
FSW
929 User Manual 1173.9411.02 ─ 19
CALCulate<n>:DELTamarker:AOFF
This command turns all delta markers off.
Example:
CALC:DELT:AOFF
Turns all delta markers off.
Usage: Event
CALCulate<n>:DELTamarker<m>:LINK <State>
This command links delta marker <m> to marker 1.
If you change the horizontal position (x-value) of marker 1, delta marker <m> changes
its horizontal position to the same value.
Tip : to link any marker to a different marker than marker 1, use the
CALCulate<n>:
​
DELTamarker<m1>:
​
LINK:
​
TO:
​
MARKer<m2>
​
or
CALCulate<n>:
​
MARKer<m1>:
​
LINK:
​
TO:
​
MARKer<m2>
​
commands.
Parameters:
<State> ON | OFF
*RST:
OFF
Example:
CALC:DELT2:LINK ON
Manual operation: See "Linking to Another Marker" on page 300
CALCulate<n>:DELTamarker<m1>:LINK:TO:MARKer<m2> <State>
This command links delta marker <m1> to any active normal marker <m2>.
If you change the horizontal position of marker <m2>, delta marker <m1> changes its
horizontal position to the same value.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC:DELT4:LINK:TO:MARK2 ON
Links the delta marker 4 to the marker 2.
Manual operation: See "Linking to Another Marker" on page 300
CALCulate<n>:DELTamarker:MODE <Mode>
This command defines whether the position of a delta marker is provided as an abso-
lute value or relative to a reference marker. Note that when the position of a delta
marker is
queried , the result is always an absolute value (see
CALCulate<n>:
​
DELTamarker<m>:
​
X
​
on page 931)!
Analyzing Measurements (Basics)