manualshive.com logo in svg

Keysight E6650A EXF, Руководство по программированию для пользователя

Keysight E6650A EXF - высокоточный и мощный спектральный анализатор с возможностью программирования пользователя. Загрузите руководство по программированию пользователя бесплатно с нашего сайта, чтобы максимально эффективно использовать все функции этого продукта. Будьте уверены в его точности и надежности. (website)

Поделиться
Скачать
background image

Notices

Copyright Notice

© Keysight Technologies 2014 - 2015

No part of this manual may be
reproduced in any form or by any
means (including electronic storage
and retrieval or translation into a
foreign language) without prior
agreement and written consent from
Keysight Technologies, Inc. as
governed by United States and
international copyright laws.

Manual Part Number

V9065-90003

Edition

Edition: 1, July 2015

Published by:

Keysight Technologies, Inc.
1400 Fountaingrove Parkway
Santa Rosa, CA 95403

Technology Licenses

The hardware and/or software
described in this document are
furnished under a license and may be
used or copied only in accordance
with the terms of such license.

U.S. Government Rights

The Software is “commercial computer
software,” as defined by Federal
Acquisition Regulation (“FAR”) 2.101.
Pursuant to FAR 12.212 and 27.405-3
and Department of Defense FAR
Supplement (“DFARS”) 227.7202, the
US government acquires commercial
computer software under the same
terms by which the software is
customarily provided to the public.
Accordingly, Keysight provides the
Software to US government customers
under its standard commercial license,
which is embodied in its End User
License Agreement (EULA), a copy of
which can be found at

http://www.keysight.com/find/sweula

The license set forth in the EULA
represents the exclusive authority by
which the US government may use,
modify, distribute, or disclose the
Software. The EULA and the license set
forth therein, does not require or
permit, among other things, that
Keysight: (1) Furnish technical
information related to commercial
computer software or commercial
computer software documentation that
is not customarily provided to the
public; or (2) Relinquish to, or
otherwise provide, the government
rights in excess of these rights
customarily provided to the public to
use, modify, reproduce, release,
perform, display, or disclose
commercial computer software or
commercial computer software
documentation. No additional
government requirements beyond
those set forth in the EULA shall apply,
except to the extent that those terms,
rights, or licenses are explicitly
required from all providers of
commercial computer software
pursuant to the FAR and the DFARS
and are set forth specifically in writing
elsewhere in the EULA. Keysight shall
be under no obligation to update,
revise or otherwise modify the
Software. With respect to any
technical data as defined by FAR
2.101, pursuant to FAR 12.211 and
27.404.2 and DFARS 227.7102, the US
government acquires no greater than
Limited Rights as defined in FAR
27.401 or DFAR 227.7103-5 (c), as
applicable in any technical data.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,” AND IS

SUBJECT TO BEING CHANGED, WITHOUT

NOTICE, IN FUTURE EDITIONS. FURTHER,

TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DISCLAIMS

ALL WARRANTIES, EITHER EXPRESS OR

IMPLIED, WITH REGARD TO THIS MANUAL

AND ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT SHALL

NOT BE LIABLE FOR ERRORS OR FOR

INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE OF

THIS DOCUMENT OR OF ANY

INFORMATION CONTAINED HEREIN.

SHOULD KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT WITH

WARRANTY TERMS COVERING THE

MATERIAL IN THIS DOCUMENT THAT

CONFLICT WITH THESE TERMS, THE

WARRANTY TERMS IN THE SEPARATE

AGREEMENT SHALL CONTROL.

Safety Information

A CAUTION notice denotes a hazard. It calls
attention to an operating procedure,
practice, or the like that, if not correctly
performed or adhered to, could result in
damage to the product or loss of
important data. Do not proceed beyond a
CAUTION notice until the indicated
conditions are fully understood and met.

A WARNING notice denotes a hazard. It
calls attention to an operating procedure,
practice, or the like that, if not correctly
performed or adhered to, could result in
personal injury or death. Do not proceed
beyond a WARNING notice until the
indicated conditions are fully understood
and met.

ii

Sequence Analyzer User's & Programmer's Reference

Содержание E6650A EXF


















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для E6650A EXF

BANLAW 800 Series Product Data Sheet preview
800 Series
Бренд: BANLAW Страницы: 32
Baker Instrument Company D6000 Digital Troubleshooting Procedures & Fault Listing preview
D6000
Бренд: Baker Instrument Company Страницы: 24
Panasonic WJHD309 - DIGITAL DISK RECORDER Conversion Manualline preview
WJHD309 - DIGITAL DISK RECORDER
Бренд: Panasonic Страницы: 7
Panasonic WJ-ND300 Administrator Console Network Setup Manual preview
WJ-ND300 Administrator Console
Бренд: Panasonic Страницы: 24
AAON RQ SERIES Manual preview
RQ SERIES
Бренд: AAON Страницы: 36
Tascam US-1200 Quick Start Manual preview
US-1200
Бренд: Tascam Страницы: 8
B-K lighting Union Bollard Installation Instructions preview
Union Bollard
Бренд: B-K lighting Страницы: 5
B-K lighting RE1 Installation Instructions preview
RE1
Бренд: B-K lighting Страницы: 4
B-K lighting PS Installation Instructions preview
PS
Бренд: B-K lighting Страницы: 3
Bartscher 1500/17 Original Instruction Manual preview
1500/17
Бренд: Bartscher Страницы: 28
Bartscher IV-65 Instruction Manual preview
IV-65
Бренд: Bartscher Страницы: 13
IBEX TS100 Quick Start Manual preview
TS100
Бренд: IBEX Страницы: 10
M-system R3 Series Instruction Manual preview
R3 Series
Бренд: M-system Страницы: 12
Gamry Instruments LPI1010 Operator'S Manual preview
LPI1010
Бренд: Gamry Instruments Страницы: 69
Gamry Instruments MultiPort Operator'S Manual preview
MultiPort
Бренд: Gamry Instruments Страницы: 30
Gamry Instruments Interface 1000 Operator'S Manual preview
Interface 1000
Бренд: Gamry Instruments Страницы: 88
Rayger Lite Instruction Manual preview
Lite
Бренд: Rayger Страницы: 2
Teac HS-2 Brochure preview
HS-2
Бренд: Teac Страницы: 9

Бренды по названию

Популярные бренды

Загрузить еще бренды