Keysight E6650A EXF, Руководство по программированию для пользователя

Страница: 122 / 657

3 Input/Output Functions
Input/Output
Example TRIG1:OUTP MEAS
Readback Measuring
Initial S/W Revision Prior to A.02.00
Main Trigger
Selects the current instrument trigger signal to be output to the Trig 1 Out, or Trig 2 Out, connector.
Key Path
Input/Output, Output Config, Trig 1/2 Output
Example TRIG1:OUTP MAIN
Readback Main Trigger
Initial S/W Revision Prior to A.02.00
Gate Trigger
Selects the gate trigger signal to be output to the Trig 1 Out, or Trig 2 Out, connector. This is the source of
the gate timing, not the actual gate signal.
Key Path
Input/Output, Output Config, Trig 1/2 Output
Example TRIG1:OUTP GTR
Readback Gate Trigger
Initial S/W Revision Prior to A.02.00
Gate
Selects the gate signal to be output to the Trig 1 Out, or Trig 2 Out, connector. The gate signal has been
delayed and its length determined by delay and length settings. When the polarity is positive, a high on the
Trig 1 Out, or Trig 2 Out, represents the time the gate is configured to pass the signal.
Key Path
Input/Output, Output Config, Trig 1/2 Output
Example TRIG1:OUTP GATE
Readback Gate
Initial S/W Revision Prior to A.02.00
Odd/Even Trace Point
Selects either the odd or even trace points as the signal to be output to the Trig 1 Out, or Trig 2 Out,
connector when performing swept spectrum analysis. When the polarity is positive, this output goes high
during the time the analyzer is sweeping past the first point (Point 0) and every other following trace point.
The opposite is true if the polarity is negative.
122 Sequence Analyzer User's & Programmer's Reference