GE CARESCAPE, Руководство пользователя

Страница: 206 / 548

Pulse oximetry
●
Only Masimo LNOP or LNCS sensors are supported. Masimo LNOP or LNCS sensors
non-invasively measure pulse rate and the amount of oxygenated hemoglobin.
Use the following guidelines when using Masimo LNOP or LNCS sensors:
￭
Read the sensor directions before use.
￭
Only use sensors with Masimo SET technology.
￭
Do not use damaged LNOP or LNCS sensors.
￭
Do not use an LNOP or LNCS sensor with exposed optical components.
￭
Refer to the cleaning instructions in the directions for use for reusable Masimo
LNOP or LNCS sensors.
Additional information for MASIMO technology
NO IMPLIED LICENSE: Possession or purchase of this device does not convey any
express or implied license to use the device with unauthorized replacement parts
which would, alone, or in combination with this device, fall within the scope of one
or more of the patents relating to this device. Sensors that are designated for single
use are licensed for use on a single patient only, and are not sold. There is no license,
implied or otherwise, that would allow use of single use Masimo Sensors beyond their
intended single use. After use of single use Masimo Sensors, the license is exhausted,
there is no further license granted by MASIMO, and they must be discarded.
This device is covered under one or more patents as set forth at
http://www.masimo.com/patents.htm .
We recommend the use of Masimo SET sensors for use with Masimo technology.
Nellcor OxiMax technology and sensor measurement
guidelines
The following measurement guidelines apply to Nellcor OxiMax:
●
The SpO
2
waveform corresponds to (but is not proportional to) the arterial pressure
waveform.
●
Only Nellcor OxiMax sensors are supported. Use the following guidelines when
using OxiMax SpO
2
accessories and sensors:
￭
Periodically inspect extension cables and sensors for damage and discontinue
use if damage is found.
￭
Do not immerse sensors.
￭
Do not use NIBP or constricting instruments on the same appendage as the
SpO
2
sensor.
Additional information for Covidien technology
NOTICE: Purchase of this instrument confers no express or implied license under any
Covidien patent to use this instrument with any oximetry, level of consciousness,
regional oxygen saturation and respiration rate, as applicable Sensor that is not
manufactured or licensed by Covidien.
For patients with SpO
2
levels in the 60% to 80% range, the LoSat accuracy feature is
available. For more information, see the CARESCAPE Modular Monitors Supplemental
Information Manual.
206 CARESCAPE Modular Monitors 2062971-001