GE CARESCAPE, Руководство пользователя

Страница: 133 / 548

Alarms
Feature
Message on the bedside monitor Message sent to the CARESCAPE
Network and displayed on the central
station/remote monitor
Service Module voltage low MODULE V LOW
Service
Service gas module - and specific error
code
SERVICE SGAS
Checking alarm function
1. Set a parameter alarm limit outside of the current measured patient values.
For example, connect the SpO
2
sensor and adjust the SpO
2
high limit under the
measured SpO
2
values.
2. Confirm that the following alarm notification events occur:
●
The audible alarm sounds the correct tone.
●
The alarm light illuminates.
●
The SpO
2
numeric value flashes in the parameter window with the correct color.
●
An alarm printout (if enabled).
3. Audio pause the alarms and confirm that the alarms are paused and that the left
side of the alarm indicator light is a solid blue color.
4. Return the parameter alarm limit to the original value.
Alarm indications
Alarm icons on the screen
Pause audio alarms - Selectable from the monitor’s main menu. Also an
indicator of a temporarily paused active audio alarm.
Audio alarms paused indicator with countdown timer - Indicates all audio
alarms are paused and the amount of time remaining for the alarm pause
period displays as a countdown timer. Displays in the upper left corner of the
screen.
Audio alarms off indicator - Displays in the upper left corner of the alarm area
when physiological audible alarms are turned off.
Alarm off indicator - Displays in the upper right corner of the parameter window
and in the
Alarms Setup menu when physiological alarms for this parameter
are turned off.
The symbol may not display at the central station or on a remote bedside
monitor.
Low priority audio off alarm indicator. Displays in the upper left corner of the
alarm area.
2062971-001 CARESCAPE Modular Monitors 133