GE CARESCAPE, Руководство пользователя

Страница: 475 / 548

Messages
Message
Location Explanation What to do
●
Zero failure
●
param.
Zeroing has failed.
●
Check the patient’s pressure
by alternative means.
●
Replace the module.
●
If the problem persists,
contact authorized service
personnel.
●
Zeroing ●
param.
Zeroing is in progress.
●
Wait until the zeroing is
completed.
●
Zero OK
●
param.
Zeroing was successful.
●
No action required.
Messages related to invasive pressures
measurement
For information regarding alarm priorities and escalation times, see the CARESCAPE Modular
Monitors Supplemental Information Manual.
Make sure you are familiar with the generic layout of the screen. This will help you identify
where on screen the following messages appear. The message location is indicated with the
following abbreviations:
●
al. area = alarm area
●
param. = parameter window
●
report = report view
●
wavef. = waveform area
Message
Location Explanation What to do
●
> 320 mmHg or > 43
kPa
●
param.
Measurement is over range, or
the sensor is faulty.
If you pre-zero a line with the
stopcock closed, it creates a
high fluid bag pressure and
triggers this message. In this
case, you can acknowledge the
alarm with the pause audio key.
●
Check the patient’s pressure
by alternative means.
●
Check the cable and
connections.
●
Rezero the transducer.
●
Replace the sensor.
●
Replace the transducer.
●
Replace the module.
●
If the problem persists,
contact authorized service
personnel.
●
< -40 mmHg or < -5
kPa
●
param.
Measurement is under range, or
the sensor is faulty.
●
Check the patient’s pressure
by alternative means.
●
Check the cable and
connections.
●
Rezero the transducer.
●
Replace the sensor.
●
Replace the transducer.
2062971-001 CARESCAPE Modular Monitors 475