GE CARESCAPE, Руководство пользователя

Страница: 419 / 548

Trends
Changing the graphic trend scales
1. Select Trends .
2. Select Graphic from the View list.
3. Select Trend Scales .
4. Select the General , IP/NIBP , Cardiac Output , or Temp tab.
5. Set the trend scales for required parameters.
Printing currently viewed graphic trends
1. Select Trends .
2. Select Graphic from the View list.
3. Select Print Page .
4. You can stop printing by selecting Cancel Printing .
Printing all graphic trend data
1. Select Monitor Setup > Printing .
2. Select Reports > Trends .
3. Select Print .
4. You can stop printing by selecting Cancel Printing .
Graphic trend resolution and the high-resolution license
The graphic trend resolution depends on the time scale of the trend. Graphic trends
are updated once a minute when the time scale is 1 hour or more. For the 20 minute
scale, the update rate is 10 seconds.
High-resolution trends is a licensed graphic trend option that provides an increased
resolution of 2 seconds for the 2, 4, and 20 minute scales. The high resolution graphic
trend is updated on user request. This trend also contains compressed CO
2
and
impedance respiration waveforms (10 Hz) as well as beat-to-beat ECG heart rate
and mean arterial pressure MAP (6 Hz).
High-resolution trend data is not saved over power down situations. This means that
data in the 2, 4, and 20 minute time scales is erased.
High-resolution trend data is neither sent nor loaded to/from the network (central
station) or acquisition modules (PDM, TRAM).
Numeric trends
Viewing numeric trends
Numeric trends contain nine pages with 24 or 72 hours of trend data depending on
the trend license. The top of the view shows the highest priority realtime waveform.
The lowest row,
Mark , shows snapshot event numbers. If more than one snapshot has
been created in a one-minute period, only the last snapshot event number is shown.
You cannot configure the layout of the
Numeric trend view.
1. Select Trends .
2062971-001 CARESCAPE Modular Monitors 419