GE CARESCAPE, Руководство пользователя

Страница: 504 / 548

Messages
Message
Location Explanation What to do
●
TC measurement
removed
●
al. area Interfaced module has been
removed.
●
Connect the module if
you want to restart the
measurement.
●
TC pCO2 high / TC
pCO2 low
●
al. area Measurement values are equal
to or outside the alarm limits.
●
Check the patient status.
●
Adjust alarm limits if
necessary.
●
TC pO2 high / TC pO2
low
●
al. area Measurement values are equal
to or outside the alarm limits.
●
Check the patient status.
●
Adjust alarm limits if
necessary.
●
TC timer expired
●
al. area The time set on the interfaced
device after a successful
calibration has now expired.
●
Change the sensor site and
reset the timer.
●
TC Tsensor high
●
Tsensor high
●
al. area
●
param.
Limit for sensor temperature is
set on the interfaced device.
●
Check the interfaced device.
●
If the problem persists,
contact authorized service
personnel.
Messages related to trends, snapshots, and
laboratory data
For information regarding alarm priorities and escalation times, see the CARESCAPE Modular
Monitors Supplemental Information Manual.
Make sure you are familiar with the generic layout of the screen. This will help you identify
where on screen the following messages appear. The message location is indicated with the
following abbreviations:
●
al. area = alarm area
●
param. = parameter window
●
report = report view
●
wavef. = waveform area
Message Location Explanation What to do
●
End of 20 min trend
data
●
End of High
Resolution trend
●
al. area There is more trend data
available but not with this
resolution.
●
Change the time resolution
in graphic trends to be more
than 20 minutes (e.g., 1 hour,
2 hours).
●
Scroll the trends to see past
data.
●
Lab data available
●
al. area Unity Network Interface Device
(ID): Interfaced device has sent
a new set of laboratory data to
the monitor.
●
Save the new data.
504 CARESCAPE Modular Monitors 2062971-001