GE CARESCAPE, Руководство пользователя

Страница: 494 / 548

Messages
Message
Location Explanation What to do
●
PEEP low
●
PEEPe high / PEEPe
low
●
PEEPi high / PEEPi low
●
PEEPtot high /
PEEPtot low
●
al. area Measurement values are equal
to or outside the alarm limits.
●
Check the patient status.
●
Adjust alarm limits if
necessary.
●
Ppeak high / Ppeak
low
●
al. area Measurement values are equal
to or outside the alarm limits.
●
Check the patient status.
●
Adjust alarm limits if
necessary.
●
Saving Loop
●
al. area A loop is being saved.
●
Wait until the message
disappears.
●
Scale changed
●
wavef. The Auto scaling mode has
changed the Flow , Paw or Vol
scale.
●
Wait until the message
disappears.
●
Service gas module
●
Service gas module
- and specific error
indication
●
al.area,
param.,
wavef. The measuring sensor is
inoperative or the temperature
in the module has increased.
●
Contact authorized service
personnel.
●
TVexp low
●
al. area Measured value is outside or
equal to the alarm limit.
●
Check the patient status.
●
Adjust alarm limits if
necessary.
●
Vent: Apnea
●
al. area No breathing detected.
●
Check the patient status.
●
Check the interfaced device.
●
Vent: Check
ventilator
●
al. area The interfaced device needs to
be checked.
●
Check the interfaced device.
●
If the problem persists,
contact authorized service
personnel.
●
Vent: Connecting
●
al. area Interfaced device is being
connected to the monitor
through Unity Network Interface
Device (ID).
●
No action required.
●
Vent: Disconnect
●
al. area Interfaced device needs to be
checked.
●
Check the patient status.
●
Check the ventilator tubing
and patient connection.
●
Check the interfaced device.
●
If the problem persists,
contact authorized service
personnel.
494 CARESCAPE Modular Monitors 2062971-001