GE CARESCAPE, Руководство пользователя

Страница: 465 / 548

Messages
Message
Location Explanation What to do
●
HR high / HR low
●
al. area Measurement values are equal
to or outside the alarm limits.
●
Check the patient status.
●
Adjust alarm limits if
necessary.
●
Irregular
●
al. area,
wavef. Physiological alarm.
●
Check the patient status.
●
LA/L lead off
●
LL/F lead off
●
RA/R lead off
●
RL/N lead off
●
wavef. An electrode is disconnected.
●
Check the electrodes.
●
Lead changed
●
wavef. The monitor automatically
switches the ECG1 waveform
selection to a measurable ECG
Lead (I, II, III, aVR, aVL, aVF,
V1, V2, V3, V4, V5 or V6) if the
current ECG1 waveform is not
measurable.
●
Note that the ECG waveform
changes according to the
lead it is measured from.
Check the lead.
●
Leads off
●
al. area,
wavef. One or more of the connected
electrodes is disconnected and
arrhythmia detection is not
possible.
●
ECG: Check the connections.
●
Learning
●
wavef. ST algorithm is in learning phase,
message shown e.g. when ECG
measurement is started.
●
No action required.
●
Missing beat
●
al. area,
wavef. Physiological alarm.
●
Check the patient status.
●
Multifocal PVCs
●
al. area,
wavef. Physiological alarm.
●
Check the patient status.
●
No 10 or 6 lead cable ●
report
No 6- or 10-lead ECG cable is
attached.
●
Connect a 6- or 10-lead cable.
●
No 12RL license ●
report
No 12RL 12 lead ECG license. ●
Contact your GE
representative to purchase
this feature.
●
No 12SL license ●
report
No 12SL ECG with ACI-TIPI
license. ●
Contact your GE
representative to purchase
this feature.
●
No telemetry
●
al. area The server cannot communicate
with the telemetry transmitter.
●
Make sure the transmitter is
not out of range.
●
Check the telemetry
transmitter’s battery.
●
Wait to see if the problem
resolves. If the problem
persists, contact authorized
service personnel.
2062971-001 CARESCAPE Modular Monitors 465