GE CARESCAPE, Руководство пользователя

Страница: 470 / 548

Messages
Message
Location Explanation What to do
●
Check SpO2 probe /
Check SpO2(2) probe
●
al. area There is no detectable SpO
2
signal, the sensor is faulty or is
detached from the patient.
●
Check the sensor and
connections.
●
Connecting
●
param.
Connection to the interfaced
device is being established.
●
No action required.
●
Faulty probe
●
param.
The sensor has failed.
●
Replace the sensor.
●
Identical SpO2
modules
●
al. area There are two or more identical
SpO
2
modules in the system.
●
Remove all but one SpO
2
module.
●
Incompatible probe
●
param.
The sensor is not compatible.
●
Replace the sensor. See the
CARESCAPE Modular Monitors
Supplemental Information
Manual.
●
If the problem persists,
contact authorized service
personnel.
●
Incompatible SpO2
probe
/ Incompatible
SpO2(2) probe
●
al. area The sensor is not compatible.
●
Replace the sensor. See the
CARESCAPE Modular Monitors
Supplemental Information
Manual.
●
If the problem persists,
contact authorized service
personnel.
●
Interference
●
param.
The measurement is disturbed.
●
Check the sensor.
●
Learning
●
param.
SpO
2
algorithm is in learning
phase.
●
No action required.
●
Low battery
●
param.
The interfaced device has low
battery charge.
●
Check the interfaced device.
●
If the problem persists,
contact authorized service
personnel.
●
Low perfusion
●
param.
Low perfusion at the
measurement point.
●
Check the sensor and sensor
positioning.
●
Relocate the sensor to a
better measurement site, if
possible.
●
Make sure the patient is not
shivering.
●
Low signal
●
param.
The quality of the signal is
questionable.
●
Check the sensor placement
and the patient status.
●
Low signal quality
●
param.
The quality of the signal is
questionable.
●
Check the sensor and sensor
positioning.
●
Relocate the sensor to a
better measurement site, if
possible.
●
Make sure the patient is not
shivering.
470 CARESCAPE Modular Monitors 2062971-001