ABB ACS380 Series, Руководство по прошивке

Страница: 323 / 568

Parameters 323
DIO1 Digital input/output DIO1 ( 11.02 DIO delayed status , bit 0) 10
DIO2 Digital input/output DIO2 ( 11.02 DIO delayed status , bit 1) 11
Timed function 1 Bit 0 of 34.01 Timed functions status 18
Timed function 2 Bit 1 of 34.01 Timed functions status 19
Timed function 3 Bit 2 of 34.01 Timed functions status 20
Supervision 1 Bit 0 of 32.01 Supervision status 24
Supervision 2 Bit 1 of 32.01 Supervision status 25
Supervision 3 Bit 2 of 32.01 Supervision status 26
Supervision 4 Bit 3 of 32.01 Supervision status 27
Supervision 5 Bit 4 of 32.01 Supervision status 28
Supervision 6 Bit 5 of 32.01 Supervision status 29
Other [bit] Source selection (see Terms and abbreviations ). -
76.03 Limit to limit trigger
type Selects the Limit to limit control trigger type. Rising Edge
Rising Edge Safe and stop limits are handled as pulses. Limit to limit
state machine changes states due to rising edge. 0
Falling edge Safe and stop limits are handled as pulses. Limit to limit
state machine changes states due to falling edge. 1
Level high Safe and stop limits are handled as static signals. Limit to
limit state machine changes states due state of high
signal. 2
Level low Safe and stop limits are handled as static signals. Limit to
limit state machine changes states due state of low signal. 3
Other [bit] Source selection (see Terms and abbreviations ).
76.04 Forward stop limit Selects the source to activate the Forward stop limit
function.
When the you enable the Forward stop command, the
function activates an stop command in the forward
direction, and the drive stops as per the stop mode
defined in the parameter
76.12 .
For more information on the function, see section Crane
stop limit function on page 546 .
Not selected
Not selected Disables the stop limit function if the Limit to limit trigger
type (
76.03 ) is Rising edge or Level high.
Enables the function if the trigger type is Falling edge or
Level low.
0
Selected Enables the stop limit function if the Limit to limit trigger
type (
76.03 ) is Rising edge or Level high.
Disables the function if the trigger type is Falling edge or
Level low.
1
DI1 Digital input DI1 ( 10.02 DI delayed status , bit 0) 2
DI2 Digital input DI2 ( 10.02 DI delayed status , bit 1) 3
DI3 Digital input DI3 ( 10.02 DI delayed status , bit 2) 4
DI4 Digital input DI4 ( 10.02 DI delayed status , bit 3) 5
DIO1 Digital input/output DIO1 ( 11.02 DIO delayed status , bit 0) 10
DIO2 Digital input/output DIO2 ( 11.02 DIO delayed status , bit 1) 11
No. Name/Value Description Default
FbEq 16
ACS380 FW.book Page 323 Friday, May 4, 2018 4:18 PM
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | T 49 80 92 81 89 0 | info@ghv.de | www.ghv.de