ABB ACS380 Series, Руководство по прошивке

Страница: 322 / 568

322 Parameters
0.0…200000.0 Range 1 = 1
71.40 Deadband delay Defines the deadband delay for the deadband function.
See parameter
71.39 Deadband range .
0.0 s
0.0…3600.0 s Delay 1 = 1 s
71.58 Increase prevention See parameter 40.58 Set 1 increase prevention . No
71.59 Decrease prevention See parameter 40.59 Set 1 decrease prevention . No
71.62 Internal setpoint actual See parameter 40.62 PID internal setpoint actual . -
76
76 Application features
Application parameters.
See also section
Limit to limit control on page 94 and
Conical motor control on page 563 .
76.01 Limit to limit control
status Displays the state of the Limit to limit control state
machine. Not
initialized
Not initialized The initial value of the state machine. 0
Rev zero, Fwd max
speed The reverse speed is limited to zero speed, and the
forward direction speed is not limited by Limit to limit
control. 1
Rev safe, Fwd max
speed The reverse speed is limited to safe speed, and the
forward direction speed is not limited by Limit to limit
control. 2
Rev max, Fwd max
speed The reverse speed is not limited, and the forward direction
speed is not limited by Limit to limit control. 3
Rev max, Fwd safe
speed The reverse speed is not limited, and the forward direction
speed is limited to safe speed by Limit to limit control. 4
Rev max, Fwd zero
speed The reverse speed is not limited, and the forward direction
speed is limited to zero speed by Limit to limit control. 5
Rev safe,
Fwd zero speed The reverse speed is limited to safe speed, and the
forward direction speed is limited to zero speed by Limit to
limit control. 6
Rev zero,
Fwd safe speed The reverse speed is limited to zero speed, and the
forward direction speed is limited to safe speed by Limit to
limit control. 7
Rev safe,
Fwd safe speed The reverse speed is limited to safe speed, and the
forward direction speed is limited to safe speed by Limit to
limit control. 8
Rev zero,
Fwd zero speed The reverse speed is limited to zero speed, and the
forward direction speed is limited to zero speed by Limit to
limit control. 9
0...9 1 = 1
76.02 Enable limit to limit
control Enables the Limit to limit control or selects the source for
limit to limit control function. For more information on the
function, see section
Limit to limit control on page 94 .
Not selected
Not selected The Limit to limit control function is disabled. 0
Selected The Limit to limit control function is enabled. 1
DI1 Digital input DI1 ( 10.02 DI delayed status , bit 0) 2
DI2 Digital input DI2 ( 10.02 DI delayed status , bit 1) 3
DI3 Digital input DI3 ( 10.02 DI delayed status , bit 2) 4
DI4 Digital input DI4 ( 10.02 DI delayed status , bit 3) 5
No. Name/Value Description Default
FbEq 16
ACS380 FW.book Page 322 Friday, May 4, 2018 4:18 PM
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | T 49 80 92 81 89 0 | info@ghv.de | www.ghv.de