5 - 9
CHAS
FRONT WHEEL AND REAR WHEEL
7. Install:
• Chain puller (left)
1
• Wheel axle
2
NOTE:
• Install the chain puller (left), and insert the
wheel axle from left side.
• Apply the lithium soap base grease on the
wheel axle.
8. Install:
• Chain puller (right)
1
• Plain washer
2
• Nut (wheel axle)
3
NOTE:
Temporarily tighten the nut (wheel axle) at this
point.
9. Adjust:
• Drive chain slack
a
Refer to “DRIVE CHAIN SLACK
ADJUSTMENT” section in the CHAPTER
3.
Drive chain slack:
48 ~ 58 mm (1.9 ~ 2.3 in)
10. Tighten:
• Nut (wheel axle)
1
• Locknut
2
T
R
.
.
125 Nm (12.5 m · kg, 90 ft · lb)
T
R
.
.
16 Nm (1.6 m · kg, 11 ft · lb)
