5 - 42
CHAS
HANDLEBAR
3. Install:
• Grip (right)
1
• Collar
2
Apply the adhesive on the tube guide
3
.
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the tube guide surface
a
with a lacquer thinner.
• Install the grip to the tube guide so that the
grip match mark
b
and tube guide slot
c
form the angle as shown.
R
L
90˚
3
1
b
c
4. Install:
• Cover (grip cap)
1
• Throttle grip
2
NOTE:
Apply the lithium soap base grease on the
throttle grip sliding surface.
5. Install:
• Throttle cables
1
To tube guide
2
.
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.