5 - 50
CHAS
4. Install:
• Plain washer
1
• Ring nut
2
Tighten the ring nut using the ring nut
wrench
3
.
Refer to “STEERING HEAD INSPEC-
TION AND ADJUSTMENT” section in the
CHAPTER 3.
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
5. Check the steering shaft by turning it lock
to lock. If there is any binding, remove the
steering shaft assembly and inspect the
steering bearings.
6. Install:
• Plain washer
1
7. Install:
• Front fork
1
• Handle crown
2
• Main switch
3
• Coupler bracket
4
• Hose guide bracket
5
NOTE:
• Install the coupler bracket on the outside of
the hose guide bracket.
• Temporarily tighten the pinch bolts (under
bracket).
• Do not tighten the pinch bolts (handle crown)
yet.
8. Install:
• Plain washer
1
• Steering shaft nut
2
T
R
.
.
145 Nm (14.5 m · kg, 105 ft · lb)
STEERING
