4 - 104
ENG
TRANSMISSION, SHIFT CAM AND SHIFT FORK
2. Install:
• 2nd wheel gear (26T)
1
• 4th wheel gear (21T)
2
• 3rd wheel gear (21T)
3
• 5th wheel gear (21T)
4
• 1st wheel gear (29T)
5
• O-ring
6
To drive axle
7
.
NOTE:
• Apply the molybdenum disulfide oil on the
inner and end surface of the idler gear and
on the inner surface of the sliding gear, then
install.
• Apply the lithium soap base grease on the O-
ring.
3. Install:
• Plain washer
1
• Circlip
2
NOTE:
• Be sure the circlip sharp-edged corner
a
is
positioned opposite side to the plain washer
and gear
b
.
• Install the circlip with its ends
c
settled
evenly on the spline crests.
c
c
New
4. Install:
• Collar
1
NOTE:
• Apply the lithium soap base grease on the oil
seal lip.
• When installing the spacer into the crank-
case, pay careful attention to the crankcase
oil seal lip.
