5 - 41
CHAS
HANDLEBAR
EC5B5000
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
• Handlebar
1
• Handlebar holder
2
• Bolt (handlebar holder)
3
NOTE:
• The handlebar holder should be installed
with the punched mark
a
forward.
• Install the handlebar so that the marks
b
are
in place on both sides.
• First tighten the bolts on the front side of the
handlebar holder, and then tighten the bolts
on the rear side.
T
R
.
.
28 Nm (2.8 m · kg, 20 ft · lb)
2. Install:
• Grip (left)
1
Apply the adhesive to the handlebar
2
.
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface
a
with a lacquer thinner.
• Install the grip (left) to the handlebar so that
the line
b
between the two arrow marks
faces straight upward.
