4 - 30
ENG
• With the rod fully wound and the chain ten-
sioner UP mark
a
facing upward, install
the gasket
1
and the chain tensioner
2
,
and tighten the bolt
3
to the specified
torque.
T
R
.
.
Bolt (timing chain tensioner):
10 Nm (1.0 m • kg, 7.2 ft • lb)
• Release the screwdriver, check the ten-
sioner rod to come out and tighten the
gasket
4
and the cap bolt
5
to the speci-
fied torque.
T
R
.
.
Tensioner cap bolt:
7 Nm (0.7 m • kg, 5.1 ft • lb)
5
4
New
3. Turn:
• Crankshaft
Counterclockwise several turns
4. Check:
• Rotor “I” mark
Align with the crankcase stationary
pointer.
• Camshaft match marks
Align with the cylinder head surface.
Out of alignment
→
Adjust.
5. Install:
• Timing plug
1
• Straight plug
2
CAMSHAFTS
