5 - 43
CHAS
HANDLEBAR
6. Install:
• Throttle cable cap
1
• Screw (throttle cable cap)
2
WARNING
After tightening the screws, check that the
throttle grip
3
moves smoothly. If it does
not, retighten the bolts for adjustment.
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
7. Install:
• Cover (grip cap)
1
• Cover (throttle cable cap)
2
8. Install:
• Start switch
1
• Master cylinder
2
• Master cylinder bracket
3
• Bolt (master cylinder bracket)
4
• Clamp
5
NOTE:
• The start switch and master cylinder bracket
should be installed according to the dimen-
sions shown.
• Install the bracket so that the arrow mark
a
faces upward.
• First tighten the bolt on the upper side of the
master cylinder bracket, and then tighten the
bolt on the lower side.
T
R
.
.
9 Nm (0.9 m · kg, 6.5 ft · lb)
Zero mm
(Zero in)
Zero mm
(Zero in)
