manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 89 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 89

System Description

ARCADIS Varic
SPR2-310.620.30.02.02

43 

of 44

Locking the monitor trolley

0

◆

To lock the monitor trolley, push the center brake down with your foot until it 
stops/engages.

Setting the direction of the monitor trolley

0

◆

In order to set the direction of the monitor trolley, push the center brake 
upwards with your foot until it stops/engages.

Warning

As long as the brake at the front is not locked, the monitor trolley can move 
freely.

There is a risk of injury to persons and damage to equipment!

◆

Lock the brake at the front of the monitor trolley.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments