Siemens ARCADIS Varic Operator'S Manual Download Page 67

Page: 67 / 476

System Description

ARCADIS Varic
SPR2-310.620.30.02.02

of 44

Selecting the noise reduction factor

◆

Press this key.
– A low integration factor is selected (for recording fast-moving objects).

When a low integration factor is selected, the LED lights up.

– If the key is pressed again, the LED goes out. A higher integration factor is

selected (for very slow movements).

Selecting the image intensifier format

You can select a zoom format.

◆

Press this key.
– The LED lights up when this function is selected.

Setting image reversal

◆

Press this key.
– The image is flipped vertically.
– The LED lights up when this function is selected.

◆

Press this key.
– The image is flipped horizontally.
– The LED lights up when this function is selected.

The image reversal is effective only on the left (live) monitor.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 67 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: