Siemens ARCADIS Varic Operator'S Manual Download Page 134

Page: 134 / 476

Operator Manual

of 60

SPR2-310.620.30.02.02

Patient data

Concluding a report

◆

Click the

Completed

button to conclude the report and the examination.

– The report and the examination is concluded.

A message indicating this is sent to the HIS/RIS system, if connected. You can
no longer make changes to the performance report.

Exiting a report as

discontinued

◆

Click the

Discontinued

button.

– The examination is no longer continued.

The report is also closed with that. A message indicating this is sent to the
HIS/RIS system, if connected.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 134 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: