manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 65 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 65

System Description

ARCADIS Varic
SPR2-310.620.30.02.02

19 

of 44

Setting the semi-transparent slot diaphragm

0

The semi-transparent slot diaphragm is used primarily for collimation when imag-
ing the extremities.

Collimation enhances image contrast and reduces scattered radiation. Direct radi-
ation that passes the soft tissue laterally is reduced to such an extent that there 
are no disturbing differences in brightness when images are viewed on the mon-
itor.

By rotating the slot diaphragm, the collimated field can be quickly oriented to the 
direction of the anatomy under examination (e.g. the extremities).

◆

Press one of the keys.
– The semi-transparent slot diaphragms are rotated to the left/right.

◆

Press this key.
– The semi-transparent slot diaphragm is closed.

◆

Press this key.
– The semi-transparent slot diaphragm is opened.

Manual slot diaphragm calibration

0

If it is determined during an intervention that the accuracy of the slot diaphragm 
has deteriorated too much, a recalibration of the slot diaphragm can be per-
formed by pressing the buttons 

OPEN

 and 

CLOSE

 simultaneously and holding 

them approx. 3 sec. This process lasts about 20 sec. During this time the 

kV

 and 

mA

 indicators will flash. It is not possible to release radiation in this case.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments