manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 346 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 346

Operator Manual

66 

of 98

SPR2-310.620.30.02.02

Documentation

There are (statutory) regulations governing the archiving period, data availability, 
and data security (data integrity, incorruptibility), and recommendations concern-
ing fire protection or water damage for the archiving of image data. The operator 
of the archive is responsible for observing these regulations.

Due to constant technical advancements, it may not be possible to implement 
storage and access for the required archiving period with a single storage tech-
nology and type of medium. Hence, migration of data may be necessary under 
the responsibility of the operator of the digital archive.

Caution

CD/DVD-R media used for data storage can be damaged or rendered unread-
able.

Loss of data!

◆

Local media should be configured and used as archive media only if the 
manufacturer has approved the media for archiving purposes.

◆

Check whether the data are legible before deleting them from the local 
database.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments