manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 190 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 190

Operator Manual

40 

of 52

SPR2-310.620.30.02.02

Examination

LithoReport

0

The LithoReport is generated for extracorporeal shockwave lithotripsy (ESWL) 
provided that the lithotripsy function is enabled on your ARCADIS Varic system 
and the lithotripter is connected to the C-arm system.

Part of the data are automatically recorded during treatment. Any other data can 
be added and postprocessed by you at any time.

(1) Icon buttons (printing a report)

(2) Generation status

EXAMINATION REPORT: Treatment in process, report is being generated.
POSTPROCESSING REPORT: Treatment is finished, the report has been 
completed and stored and can be postprocessed.

(3) Work status and verification status

(4) Content area

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments