Siemens ARCADIS Varic, Operator'S Manual, Page: 370 / 476

Operator Manual
90
of 98
SPR2-310.620.30.02.02
Documentation
◆
Select the editing and processing status to be reached.
– Automatic data transfer will only be started if both attributes have the indi-
cated status.
Please note that you can also assign the "completed" status manually in the
Patient Browser and thus initiate automatic data transfer, if necessary.
◆
Select the data type and the target.
Automatic data transfer should always be configured at instance level.
◆
Click this check box if you want to limit the data transfer to marked and/or
filmed/printed images.
– Other images will not be transferred automatically even if the transfer rules
have been met.
Activating rules
◆
Click on the Activate transfer rule check box.
– The selected rule is active and used for starting automatic data transfer
jobs.
Shut down the ARCADIS Varic and restart it after activating new transfer rules.
Otherwise, the status display for data transfer may not be updated (display will
be set to "Waiting" although an auto transfer was successfully completed).