manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 311 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 311

Documentation

ARCADIS Varic
SPR2-310.620.30.02.02

31 

of 98

Reorganizing film sheets

0

Using the 

Filming

 task card, you can reorganize film jobs in such a way that only 

those images are exposed or printed that you require.

Deleting images or

film sheets

◆

Select one or more images or film sheets or use the input focus.

◆

Select 

Edit > Delete

.

Or

◆

Delete the images/film sheets with this button.

Or

◆

Select 

Film > Clear Document(s)

.

– The images are deleted, the segments in the film job remain empty.

Filling empty

segments

◆

Select 

Film > Repack

.

– The gaps are filled.

Copying images or

film sheets

◆

First select the images/film sheets that you want to copy.

◆

Select 

Edit > Copy

.

◆

Select the image in front of which you want to insert the copies.

◆

Select 

Edit > Paste

 from the main menu.

– All the copied images are inserted in front of the selected segment. 

The image of this segment is moved back in the film job.

Moving images or

film sheets

◆

Select the image or the images that you want to move.

◆

Select 

Edit > Cut

.

◆

Select the segment in front of which you want to move the cut-out images.

◆

Select 

Edit > Paste

 from the main menu.

Appending a new

film sheet

◆

Select 

Film > New Film Sheet

 at any point in the film job.

– A new (empty) film sheet is appended to the end of the film job.

◆

Then insert the copied or cut images into this sheet.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments