Siemens ARCADIS Varic Operator'S Manual Download Page 79

Page: 79 / 476

System Description

ARCADIS Varic
SPR2-310.620.30.02.02

of 44

Radiation release with the footswitch

The footswitch is used if both hands need to be free during the exposure.

Standard footswitch

The footswitch is also suitable for applications where fluids may land on the floor.

For operation of the multifunctional footswitch (option) see
(

→

Register 11: Options, Page 8).

Releasing radiation

The right footswitch is always used to activate fluoroscopy (CFC) (standard set-
ting).

The left footswitch is used to activate the currently selected operating mode.

Exception

: If fluoroscopy (CFC) is selected, the left pedal is assigned the digital

radiography (DR) mode.

The functionality of the two pedals can be reversed by Siemens Service upon
request.

◆

Keep the foot pedal pressed during radiation release.

SIEMENS

Warning

When the C-arm is rotated by 180° and fully lowered, the I.I. and the footswitch
may come into contact.

Unintentional release of radiation!

◆

Please make sure that the footswitch is not located underneath the I.I.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 79 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: