manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 61 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 61

System Description

ARCADIS Varic
SPR2-310.620.30.02.02

15 

of 44

The lifting column cannot be moved.
The EMERGENCY STOP button is pressed and must be unlocked.

◆

Turn the rotary knob clockwise.

◆

If the lifting column can still no longer be moved in any direction, then please 
contact Customer Service.

Moving the C-arm horizontally

0

You can move the support arm horizontally by up to 20 cm.

◆

Release the brake marked in green (arrow).

◆

Move the support arm to the desired position while observing the green scale.

◆

Lock the brake again.

STOP

STOP

20 cm

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments