Siemens ARCADIS Varic Operator'S Manual Download Page 175

Page: 175 / 476

Examination

ARCADIS Varic
SPR2-310.620.30.02.02

of 52

References task card

The imaging system uses two monitors for image display.

❏

The left monitor is used to display live images as well as preoperative and
postoperative images. It contains the

Examination

and

Viewing

task cards.

❏

The right monitor is used to display reference images and contains the

References

Native

(for the

Subtraction

option), and

Filming

(option) task

cards.

Reference images

The

References

task card is used to display specific images during an examina-

tion.

Reference images may be:

❏

preoperative images, incl. images of other modalities (e.g. CT, MR)

❏

images of current examinations

❏

images from previous examinations

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 175 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: