Home
/
Siemens
/
ARCADIS Varic
/
Operator'S Manual

Siemens ARCADIS Varic, Operator'S Manual, Page: 375 / 476

Share

Page: 375 / 476

Siemens ARCADIS Varic Operator'S Manual Download Page 375

Documentation

ARCADIS Varic
SPR2-310.620.30.02.02

95

of 98

Defining the work status for storing

0

Here you can select the work status that patient and examination data must have
reached before storing. If this work status is not reached, a warning will be dis-
played before data transfer starts.

◆

Use the radio buttons to define the work status required as a prerequisite for
storing.

The

Verified

and

Read

options apply to the study and series levels only.

If you select the

Unspecific

option, you can store data of any work status without

confirmation.

◆

Click on the

Printed

check box, if necessary.

– Images must have been printed/filmed at least once before they are

stored.

«
...
373
374
375
376
377
...
»

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments