Siemens ARCADIS Varic Operator'S Manual Download Page 321

Page: 321 / 476

Documentation

ARCADIS Varic
SPR2-310.620.30.02.02

of 98

Showing/hiding text

In the film settings, you can select whether you want to have text information
about the images printed/exposed.

Image texts and patient names should not be hidden. Otherwise, printed images
can easily be mixed up.

◆

Click the

All text

button.

— or —

◆

Select the

All text

option in the

Film Properties

dialog box.

– All text information about the images is displayed in the segments and later

filmed or printed together with the images.

◆

Click the

No text

button.

— or —

◆

Select the

No text

option in the

Film Properties

dialog box.

– All text information in the segments is hidden.

◆

Click the

Customized text

button.

— or —

◆

Select the

Customized text

option in the

Film Properties

dialog box.

– Only part of the text information is displayed and exposed on film or

printed.

In the

Film Properties

dialog box, you can now select which text information is

to be displayed if the

Customized text

option is selected.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 321 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: