manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 391 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 391

Configuration

ARCADIS Varic
SPR2-310.620.30.02.02

13 

of 24

Configuring the operating programs

0

An examination set consists of a set of operating programs. Each of these pro-
grams defines the settings for X-ray generation and image acquisition for one 
single operating mode. 

The operating programs are configured in the 

Operating Program 

Configuration

 dialog, which you have called up from the 

Examination Set 

Configuration

 dialog. 

The Operating Program Configuration dialog contains a tab card (labeled corre-
spondingly) for each supported operating mode. In the tab cards you can specify 
the parameters of the operating program in the respective operating mode. 
In addition, some parameters may be common to several operating modes of an 
examination set (e.g. edge enhancement). They are available on other tab cards 
that are independent of the operating mode.

The parameters for the Fluoroscopy, Pulsed Fluoroscopy and Digital Radiography 
modes are configured for every examination set. For the Subtraction option the 
parameters for the Subtraction and Roadmap modes are configured additionally. 
The parameters are individually adapted to each examination set.

There is a 

Default

 button on every tab card. With this button you can reset the 

parameters back to the original state (parameter settings of the underlying oper-
ating program).

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments