manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 27 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 27

Safety

ARCADIS Varic
SPR2-310.620.30.02.02

9 

of 28

Saving the log file

0

It is recommended to back up the log file on an external data medium (CD, USB 
memory medium) when system error messages occur. You can then attach the 
log file to an e-mail and send it to Siemens Service. Siemens Service can evaluate 
the recorded system activities and identify the error without the need of a site 
visit.

◆

Insert a CD into the drive of the monitor trolley or connect the USB memory 
medium.

◆

Select 

Options > Save Log File

 from the main menu.

– A dialog window is displayed.

◆

Click this button.
– The log file is saved to the USB memory medium as a compressed zip file.

Or

◆

Click this button.
– The log file is written to the CD as a compressed zip file.

◆

Close the dialog box with 

Close

.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments