Siemens ARCADIS Varic Operator'S Manual Download Page 317

Page: 317 / 476

Documentation

ARCADIS Varic
SPR2-310.620.30.02.02

of 98

Image, text and graphic display

The layout of the film sheet defines the number and size of the segments on a
film sheet. In the

Film Preview

window and the

Filming

task card, you can

change the aspect ratio of individual images in your segments and define wheth-
er and how text and graphics are to be printed or exposed on film.

◆

Click the

Images

subtask card into the foreground.

— or —

◆

Call up the

Film Properties

dialog box.

– The settings of the currently selected images are displayed.
– The dots in the radio buttons are displayed gray if the settings of the

images are different.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 317 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: