manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 399 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 399

Configuration

ARCADIS Varic
SPR2-310.620.30.02.02

21 

of 24

Changing parameters

◆

Select the required new parameters from the selection lists.

◆

Click this button.
– Your changes are applied to the ARCADIS Varic system.
– The configuration dialog remains open for further entries.

◆

Continue configuring the next operating mode on the corresponding tab card.

— or —

◆

Click this button.
– The dialog box closes.

The LUT Data tab card

0

The specified Look-up-Tables (LUTs) are valid for those operating modes of the 
current examination set which generate/display native images.

If the SUB/Roadmap option is enabled, additional LUTs (look-up tables) can be 
selected for those operating modes of the current examination set that generate/
display subtracted images.

Up to 4 LUT values can be activated. You can switch between them using the 
LUT keys for monitor A and monitor B on the C-arm system.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments