manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 446 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 446

Operator Manual

10 

of 16

SPR2-310.620.30.02.02

Maintenance

Installing an update in

syngo 

As a last step, the update of the virus protection files must be installed and acti-
vated in the 

syngo

 user interface. 

It is recommended to complete this step immediately to finish the update pro-
cess. For this purpose, the 

syngo

 user interface must be restarted. The 

Software 

Distribution/Installation

 dialog box is automatically displayed to complete the 

installation for 

syngo

.

You can also open the 

Software Distribution/Installation

 window later (manu-

ally, without restarting). For this purpose, click the yellow exclamation mark on 
the status bar. This symbol will appear approx. 15 min after installing the virus up-
date in the system.

◆

Call up 

Options > End Software Session

 in the main menu.

– The 

System Message

 dialog box is displayed.

◆

Click 

Restart

.

– The

 syngo

 user interface and the application programs are shut down and 

then started again.

– After the start-up of 

syngo

, the 

Software Distribution/Installation

 dialog 

box is shown.

◆

Click 

Install

.

– The virus protection update is installed and activated in 

syngo

.

– The 

Software Distribution/Installation

 dialog box is closed.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments