manualshive.com logo in svg

Siemens ARCADIS Varic, Operator'S Manual, Page: 457 / 476

Share
Download
Siemens ARCADIS Varic Operator'S Manual Download Page 457

Options

ARCADIS Varic
SPR2-310.620.30.02.02

5 

of 24

Wireless network connection WLAN (option)

0

The WLAN option enables a wireless connection between the ARCADIS Varic 
and a (hospital) network. The dedicated WLAN unit is integrated into the monitor 
trolley housing and completely set up. Its ON/OFF switch is found on the side of 
the monitor trolley.

Activating WLAN

0

◆

To activate WLAN, use the switch on the side of the monitor trolley.

Once the WLAN unit is switched on, it takes less than a minute for the WLAN 
connection to be functional.

WLAN ON/OFF switch

Warning

The operation of WLAN may lead to disruptions of other electrical systems.

This may endanger the function of life-support systems!

◆

Maintain a minimum distance of 1 m between the WLAN unit and any other 
devices when WLAN is in operation. If this is unfeasible at times (e.g. in the 
operating room), then switch off the WLAN for as long as necessary.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Reviews:

No comments