Siemens ARCADIS Varic Operator'S Manual Download Page 234

Page: 234 / 476

Operator Manual

of 78

SPR2-310.620.30.02.02

Image Processing

Stopping the movie

◆

Select

Scroll > Pause movie

or click the button.

– The running movie is stopped.
– If you continue playback of the movie, it will start from the segment where

you paused.

Stopping movie mode

◆

Click the

Stop

button.

– The running movie is stopped.
– If you continue playback of the movie, it will start from the beginning again.

There is no indication where the film was stopped.

Storing the scene

Scenes of a current examination that have not yet been saved can be stored
using the Last Scene Hold function.

Prerequisite: Scene review has been stopped.

◆

Select

Patient > Save LSH Scene

from the main menu.

— or —

◆

Press function key

on the keyboard.

– The last 120 images are stored in the local database.

Summary of Contents for ARCADIS Varic





























































































































































































































































































































































































































































































Search results

Summary of Contents for ARCADIS Varic

Reviews:

Siemens ARCADIS Varic, Operator'S Manual, Page: 234 / 476

Search results

Summary of Contents for ARCADIS Varic

Reviews: