Siemens ARCADIS Varic, Operator'S Manual, Page: 288 / 476

Operator Manual
8
of 98
SPR2-310.620.30.02.02
Documentation
Layouts and settings
0
All film settings such as the layout of the film sheet or the selected camera/printer
are defined in so-called film layouts.
Standard layout Provided that you do not make any changes to the default film settings, you always
work with the general default layout defined by Siemens Service during installation
of your system.
Changing film settings If you are not satisfied with the default film settings (default layout), you can
change individual film settings using the virtual film sheet. The current film job is
then processed with your new settings. For the next film job, the system will use
the default settings again.
Study-specific layouts In the Configuration of the Filming task card, you can define special film set-
tings for individual studies and series. Whenever you film or print images of a
study or series of the same type, the system automatically uses this study-spe-
cific layout.
Print modes
The regular page mode is the default print mode. The scalable page mode pro-
vides images with reduced quality and does not support original size.